TL;DR
Get home appliances delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
A DIY featured by Hunker turns a two-pack of Dollar Tree fluted bowls and glass taper candleholders into two vintage-style planters. The creator’s method uses glue, primer or paint, and antique wax; the source does not report testing, durability, or a complete project cost.
Hunker has reported a DIY project that turns a two-pack of fluted bowls from Dollar Tree and glass taper candleholders into two vintage-style planters. The design, attributed to Facebook creator She’s So CraftDee, uses glued-together glass pieces, a coat of primer or paint, and antique wax for a distressed finish.
The project starts with a two-pack of Carters Corner Clear Flared Bowls, listed in the report at $2, and three Glass Taper Candleholders, listed at $1.25 each. Other supplies include a hot glue gun, a paint sponge, antique wax, and a choice of primer, acrylic paint, or chalk paint. The reported prices are tied to the source article and may vary by store or over time.
To make the shorter planter, the instructions call for applying hot glue to the rim of one candleholder and pressing a bowl onto it. For the taller version, glue the openings of two candleholders together, then attach the second bowl to the base of one candleholder. The assembled pieces are coated with the selected primer or paint; the report recommends using additional coats if needed for even coverage.
After the coating dries, lightly apply antique wax with a paint sponge and wipe it back with a paper towel. The creator’s finish is intended to look rustic, so uneven or patchy wax is acceptable. The source says the primer spray used by She’s So CraftDee takes about 30 minutes to dry, but gives no universal drying time for other products. The finished pieces can hold a real cutting or a faux plant, according to the report.
A Low-Cost Decorative DIY
The project offers a way to make coordinated decorative planters from commonly available household and craft supplies, rather than buying finished pieces. Its appeal is the combination of a simple assembly method and a finish that can be adjusted through paint color and wax application. The source presents it as a budget-conscious option, but does not compare its total cost with retail planters or provide evidence about savings.
For readers trying the project, the distinction between a decorative planter and a watertight planting pot matters. The source describes gluing bowls and candleholders together and suggests adding real or faux plants, but does not say whether the bowls have drainage holes or whether the joints resist water. Using a nursery pot inside the finished piece may help keep soil and water contained, though that is a practical suggestion rather than part of the reported instructions.
Products Worth Considering
Dyson V8 Cordless Vacuum
Sonos Era 100 SL Compact, Microphone-Free Speaker – Black
Ring Battery Doorbell (2nd Gen) and Indoor Cam Plus Bundle, Matte Mocha and Black
As an affiliate, we earn on qualifying purchases.
How the Two Planters Are Built
The design uses the same basic parts for both pieces but changes the candleholder arrangement to create different heights. One bowl sits on a single candleholder for the shorter planter; the second bowl rests on a stand made by joining two candleholders. The result depends on the shapes of the selected bowls and holders, so the exact appearance may differ from the creator’s version.
Hunker identifies Bulls Eye 1-2-3 Plus white primer spray as the creator’s choice, while saying acrylic or chalk paint can also be used. It lists the primer at $11 and Waverly Inspirations Chalk Paint Wax at $7.27, with similar wax products available in other colors. Those listed items are not the full cost of the project: the article also identifies glue, a sponge, and paint or primer, and does not state whether the creator already owned any supplies.
“Either primer, acrylic, or chalk paint will work for the finish.”
— She’s So CraftDee, as described in Hunker’s report
Water Resistance and Final Cost
The supplied report does not establish whether the assembled planters are watertight, durable, or suitable for outdoor use. It also does not specify glue curing time, whether the glass should be cleaned or prepared in a particular way before painting, or how long the completed pieces should dry before being filled. Those details may depend on the adhesive and coating selected.
The quoted prices are figures in the source, not confirmed current prices or a complete budget. The article does not say whether the bowls and candleholders are available at every Dollar Tree location, and the source material provides no publication date. Readers should check product labels for application and drying instructions rather than relying on the approximate time given for one primer.
Check Supplies Before Assembly
Anyone following the project should first confirm the availability and current prices of the bowls, candleholders, paint, and wax, then choose a coating compatible with the materials. Follow the adhesive and coating manufacturers’ directions for application, ventilation, and drying, and let the finished assembly cure fully before placing a plant in it. The source reports no planned follow-up or independent test of the design, so its long-term performance remains unreported.
Key Questions
What supplies does the project call for?
The reported materials include a two-pack of fluted bowls, three glass taper candleholders, a hot glue gun, a paint sponge, antique wax, and primer or paint. The source lists specific products and prices, but availability and prices may change.
How are the two planter heights made?
The shorter design attaches one bowl to one candleholder. For the taller design, two candleholders are glued together at their openings, and the second bowl is attached to the base of one holder.
Does the project require spray primer?
No. The report says the creator used white primer spray, but acrylic or chalk paint can also be used. Follow the selected product’s label for preparation, ventilation, and drying directions.
Can I put a real plant in the finished planter?
The report suggests using a real cutting or a faux plant, but does not confirm that the glued assembly is waterproof or that the bowls have drainage. A separate nursery pot can be used inside as a precaution against leaks.
How long does the project take to dry?
The source gives an approximate 30-minute drying time for the specified primer spray. It does not provide a general drying time for other paints, wax, or glue, so use the product instructions and allow the assembly to cure before use.
Source: hunker.com
