If your Bissell ProHeat 2X Revolution Pet Turbo isn’t spraying water or cleaning solution, it can hinder your carpet cleaning efforts. Fortunately, many issues are simple to diagnose and fix with basic steps. This guide walks you through common causes and practical solutions to get your machine back in action.
Follow these instructions carefully to ensure safety and effectiveness. Regular maintenance can also prevent future problems and extend your cleaner’s lifespan.
Key Takeaways
| Clogged or Blocked Nozzle | Blocked spray nozzle prevents solution from being dispensed. |
| Empty or Improperly Filled Solution Tank | Low or incorrectly filled tank stops spraying. |
| Faulty Pump or Motor | Pump failure stops water flow; motor issues may affect operation. |
| Air Lock in System | Air trapped in hoses can block spray function. |
| Blocked or Dirty Hoses | Hoses clogged with debris hinder spray delivery. |
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner, 35799
TURBOSTRENGTH MOTOR TECHNOLOGY. Delivers an energy-efficient 40% more suction power and 50% noise reduction for a quiet clean.
As an affiliate, we earn on qualifying purchases.
Check the Solution Tank
- Ensure the solution tank is properly filled with clean cleaning solution.
- Remove the tank following the manufacturer’s instructions and inspect for cracks or damage.
- Refill if empty, and securely reattach the tank.
JORAIR Brush Replacement Compatible with Bissell CrossWave, 3 Multi-Surface Brush Roll 1868 + 3 Vacuum Filter 1866 Vacuum Filter, Compare to Part 1608683, 160-8683, 1608684
【Compatibility】The filter and brush replacement compatible with Bissell CrossWave 1785G,1785B,1785F,2328,2305,2305K,1785,17853,17854,17855,17856,1785Q,1785A,17852,17858,17859,1785P,1785R,1785T,1785V,1785W,2303,2306A,2306,23062,23068,2551,3888A (Please note：this kit is only compatible with Bissell...
As an affiliate, we earn on qualifying purchases.
Inspect and Clear the Nozzle
- Locate the spray nozzle on the front of the cleaner.
- Remove any visible debris or buildup using a small brush or pin.
- Run water through the nozzle to clear clogs, ensuring water flows freely.
Check the Pump and Hoses
- Turn off and unplug the machine before inspecting.
- Look for kinks, blockages, or leaks in the hoses.
- If hoses are clogged, disconnect and flush with warm water.
Prime the System to Remove Air Locks
- Fill the solution tank and turn on the cleaner.
- Hold the spray trigger for 10-15 seconds to help push air out.
- Repeat if necessary until solution sprays consistently.
Test the Spray Function
After completing the above steps, turn on the cleaner and activate the spray function. Observe if water or solution is being dispensed properly.
The Products in This Guide
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
- ✔ Power: TurboStrength
- ✔ Modes: MAX, EXPRESS
- ✔ Brushes: Dual DirtLifter PowerBrushes
JORAIR Brush Replacement Compatible
- ✔ Package Count: 3 brushes
- ✔ Filter Type: Multi-surface
- ✔ Compatibility Note: Check model before purchase
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
The BISSELL ProHeat 2X Revolution Pet Turbo is a powerful and versatile carpet cleaner. When it stops spraying, diagnosing the cause involves checking the solution tank, nozzle, hoses, and air locks. Following these steps can quickly resolve the issue and get your machine working efficiently again.
Pros:
- Powerful suction with TurboStrength Motor
- Multiple cleaning modes including MAX and EXPRESS
- Heatwave Technology maintains water temperature
- Dual DirtLifter PowerBrushes for embedded dirt
Cons:
- Can be complex to troubleshoot for beginners
- Requires regular maintenance
- Hoses and nozzles can clog over time
Best for: Pet owners and deep cleaning tasks requiring powerful suction
Not ideal for: Light cleaning or infrequent use where simplicity is preferred
Bottom line: Regular maintenance and troubleshooting ensure your Bissell cleaner performs at its best.
JORAIR Brush Replacement Compatible
The JORAIR Brush Replacement kit is compatible with Bissell CrossWave models and offers an affordable way to maintain your machine’s cleaning efficiency. Replacing worn brushes and filters helps ensure consistent spray and suction performance.
Pros:
- Compatible with various CrossWave models
- Includes multiple brushes and filters
- Easy to install
- Affordable maintenance option
Cons:
- Limited to CrossWave models
- Requires manual replacement
- Not suitable for non-compatible models
Best for: Maintaining and restoring CrossWave cleaning power
Not ideal for: For Bissell carpet cleaners like the ProHeat that don’t use these parts
Bottom line: An affordable and easy way to keep your CrossWave functioning optimally.
Frequently Asked Questions
Why is my Bissell carpet cleaner not spraying water?
Common causes include a clogged nozzle, empty solution tank, air lock in hoses, or a faulty pump. Follow the troubleshooting steps to identify and fix the issue.
How do I clear a clog in the spray nozzle?
Remove the nozzle and clean it with warm water and a small brush or pin to dislodge any debris or buildup.
Can I use any cleaning solution with my Bissell?
It’s best to use Bissell Multi-Surface Solution or other recommended formulas compatible with your model to ensure optimal cleaning and prevent damage.
How often should I perform maintenance on my Bissell cleaner?
Regularly inspect and clean filters, nozzles, and hoses after each use, and replace parts as needed to maintain performance.
Keep Your Bissell Running Smoothly
By understanding common causes and following these troubleshooting steps, you can quickly resolve issues with your Bissell carpet cleaner not spraying. Regular maintenance and prompt repairs will ensure your machine continues to deliver professional-grade cleaning results, making your home sparkle with less hassle.
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as of the time of publishing.
